Introducing our newest product to the range. Water Soluble Clay Transfers!
 
PLEASE NOTE IF YOU ARE BROWSING OUR TRANSFERS AND THE PRODUCT DESCRIPTION DOES NOT STATE WATER SOLUBLE THEN ITS NOT. WE WILL SLOWLY PHASE OUT OUR ORIGINAL TRANSFERS IN TIME. 

Size - a generous 16cm x 16cm 

HOW TO:
1. Make sure your clay is well conditioned onto your tile ensuring there are no air bubbles or gouges on your clay surface 

2. Place transfer print side down and burnish onto the clay using your roller or fingers. Ensuring the transfer is secure on he clay   
 
3. Take your tile transfer to the tap and run under light running cold water. 
Once the paper is rinsed away you can very gently use your fingers to any remainder paper off. Be sure not to apply too much pressure as this can damage the desing. Don't worry as you can also rinse any excess off after baking. 

4. Use a paper towel or tissue and to gently dab away any excess water 
 
5. Once the surface is dry you can now cut your masterpieces. 

Whilst you don't have to seal we do recommend it to improve the longevity of your pieces. 
I recommend a UV resin, Sculpey/Cernit top coat or your finisher of choice. 
 
Please note slight colour change can happen. To help lessen this please tent your work. 

As the ink is non transferable you can also use embossing cutters as well as texture rollers. 

If in doubt head to Instagram as there are loads of tutorials on how to use water soluble transfers.