top of page

Sanaaa UV Resin 50gMake those pieces pop by finishing with UV resin


Squeeze tip will be provided


PLEASE NOTE: UV Resin is a highly toxic substance - please use appropriate PPE Gear and use in a well ventilated area



Safety data sheet information below


Hazards identification Emergency Overview Physical state: Liquid HEALTH: 1* Color: transparent FLAMMABILITY: 2 Odor: light PHYSICAL HAZARD: 1 Personal Protection: See Section 8 WARNING: HARMFUL IF SWALLOWED, ABSORBED THROUGH SKIN OR INHALED.DO NOT SPRAY. DO NOT HEAT.MAY CAUSE ALLERGIC SKIN REACTION.CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION Relevant routes of exposure: Skin, Inhalation, Eyes Potential Health Effects Skin contact: Contact skin will cause irritation. Guangzhou Aican Co., Ltd. 2. Ingredients 1. Chemical product and company identification Brand: SANAAA Address: K2010 No.67, Airport Road Baiyun District Guangzhou China Material Safety Data Sheet MS20191023001 Product type: Ultraviolet Resin Telephone: +86-020-31239736 Date:10-23-2019 Fax: 020-31239736 Product name: UV resin Epoxy Manufacturer : SANAAA Eye contact: Contact with eyes will cause irritation. 4. First aid measures Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention. Skin contact: Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and shoes. Wash clothing before reuse. Get immediate medical attention if symptoms occur. Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical attention. Ingestion: Do not induce vomiting. Keep individual calm. Get medical attention immediately 5. Fire-fighting measures Flash point:105°C Autoignition temperature: Not available Flammable/Explosive limits-lower %: Not available Flammable/Explosive limits-upper %: Not available Extinguishing media: Foam, dry chemical or carbon dioxide. Special fire fighting procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Unusual fire or explosion hazards: Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers. Hazardous combustion products: Oxides of carbon. Oxides of nitrogen. Irritating organic vapors. Toxic fumes. 6. Accidental release measures Environmental precautions: Remove sources of ignition. Prevent product from entering drains or open waters. Clean-up methods: Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent. Store in a partly filled, closed container until disposal. 7. Handling and storage Handling: Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. DO NOT heat or spray. Use only with adequate ventilation. Refer to Section 8. Use only in area provided with appropriate exhaust ventilation. Storage: For safe storage, store at or below 26°C (80°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Incompatible products: Refer to Section 10. 8. Exposure controls/personal protection Engineering controls: Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits. Respiratory protection: Use COSHA approved respirator if there is potential to exceed exposure limit(s). If this material is handled at elevated temperatures or under mist forming conditions, without engineering controls, a COSHA approved respirator must be used. Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact. Neoprene gloves. Eye/face protection: Safety goggles or safety glasses with side shields. In a splash hazard environment, chemical goggles should be used in combination with a full face shield. 9. Physical and chemical properties Physical state: Liquid Color: transparent Odor: light Vapor pressure: Not available pH: Not applicable Boiling point/range: Greater than 93°C (200°F) Melting point/range: Not available Specific gravity: 1.10 Vapor density: Not available Evaporation rate: Not available Solubility in water: Slight Partition coefficient (n-octanol/water): Not available VOC content: Total volatiles 0.80 % 10.Stability and reac tivity Stability: Stable under normal conditions of storage and use. Hazardous polymerization: May occur. Hazardous decomposition products: Oxides of carbon. Oxides of nitrogen. Dimethylamine. Irritating organic vapors. Incompatability: Strong acids. Strong oxidizing agents. Bases. Conditions to avoid: Heat, flames, sparks and other sources of ignition. Do not heat above 26°C(80°C). 11.Toxicological information Carcinogen Status Hazardous components NTP Carcinogen IARC Carcinogen COSHA Carcinogen 1,3-Propanediol, 2-ethyl-2-(hydroxymethyl)-, polymer with bis(isocyanatomethyl)benzene NO NO NO Isobornyl Acrylate NO NO NO Trimethylolpropane Triacrylate NO NO NO Dipentaerytritol Hexaacrylate NO NO NO 1-Hydroxycyclohexyl Phenyl Ketone NO NO NO Ethyl(2,4,6-trimethylbenzoyl) phenylphosphinate NO NO NO Literature Referenced Target Organ & Other Health Effects Hazardous components Health Effects/Target Organs 1,3-Propanediol, 2-ethyl-2-(hydroxymethyl)-, polymer with bis(isocyanatomethyl)benzene No Records Isobornyl Acrylate No Records Trimethylolpropane Triacrylate No Records Dipentaerytritol Hexaacrylate No Records 1-Hydroxycyclohexyl Phenyl Ketone No Records Ethyl(2,4,6-trimethylbenzoyl) phenylphosphinate No Records 12.Ecological information Ecological information: Not available 13.Disposal considerations Information provided is for unused product only. Recommended method of disposal: Dispose of according to P.R.C, province and local governmental regulations. ECE hazardous waste number: Not a RCRA hazardous waste. 14.Transport information The shipping classifications in this section are for non-bulk packaging only (unless otherwise specified). Shipping classification may be different for bulk packaging. P.R.C Department of Transportation Ground : Proper shipping name: Unrestricted Hazard class or division: None Identification number: None Packing group: None International Air Transportation (ICAO/IATA): Proper shipping name: Unrestricted Hazard class or division: None Identification number: None Packing group: None WaterTransportation (IMO/IMDG): Proper shipping name: Unrestricted Hazard class or division: None Identification number: None Packing group: None Marine pollutant: None P.R.CRegulatory Information All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory. 15.Regulatory information 16. Other Information DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular

Sanaaa UV Resin - 50g

    bottom of page